Professional Broadcast Flypack - Portable OB Production System – OB Vans & Flypack Systems
Description
A Flypack represents a complete, self-contained outside broadcasting solution designed for rapid deployment to remote locations and live event coverage. This integrated system combines vision mixing, audio processing, routing infrastructure, and encoding capabilities within portable flight cases for maximum mobility and ease of transportation. Flypack configurations typically include a compact vision mixer, multiviewer monitoring, professional audio mixing console, IP routing capabilities, and redundant backup systems to ensure broadcast reliability. Ideal for sports events, concerts, breaking news coverage, and remote location production, flypack systems enable broadcasters to achieve studio-quality output from virtually any venue without permanent infrastructure installation. The modular design allows for customization based on specific production requirements, from single-camera interviews to multi-camera live event coverage. Setup and teardown times are significantly reduced compared to traditional outside broadcast vans, making flypack solutions the preferred choice for mobile production teams requiring flexibility and rapid deployment capabilities.
Request a quote or information
FAQ
What's the complete signal chain I need to deploy this flypack on a live event, and what external equipment must I bring?+
The flypack is self-contained for mixing and routing but requires external cameras with CCUs/RCPs, a multiformat camera control system, and communications infrastructure. You'll need SDI camera cables (or IP interfaces if using ST 2110), fiber for long-distance runs, and a control network for any external camera control. Confirm whether your specific configuration supports both SDI and IP inputs natively, or if firmware/option boards are needed. Power distribution, grounding, and fiber termination equipment must be provisioned separately. Verify integration with your existing master control room or playout system via the output formats your config supports.
Does this flypack support ST 2110 IP workflows, and what's required to integrate it into an all-IP OB environment?+
The unit includes IP routing capability (ASI/Ethernet per specs), but ST 2110 native support depends on your exact configuration and installed firmware. Confirm whether your order includes dedicated ST 2110 option boards and which PTP grandmaster/timing reference is compatible. You'll need managed network switches with VLAN support, redundant fiber runs, and network-attached storage synchronized to SMPTE timecode. Test integration with your IP multiviewer and ensure the audio mixing console can accept AES67 streams. This is configuration-specific—request a detailed IP datasheet for your model build.
What happens if the primary vision mixer fails mid-broadcast, and how quickly can I switch to the backup?+
Backup switcher and routing systems are available as documented redundancy options, but you must confirm these are included in your purchase configuration. Failover is not automatic—manual switchover via control panel takes 30–60 seconds; if zero-cut switching is required, you need a routing matrix configured in advance with both mixers monitoring all inputs. Test your specific failover procedure before deployment. Backup audio console redundancy operates similarly. Without these options ordered explicitly, the system has no built-in protection against single-point failure.
The spec says 8–16 SDI/IP channels depending on configuration—how do I know exactly how many I'm getting, and can I add more inputs later?+
Input channel count is modular and determined at manufacture; confirm your exact channel allocation in the purchase order and technical specification sheet. Scalability to add inputs typically requires additional input cards or modules, which may be accommodated in spare card slots if the frame has available bandwidth and power headroom. Verify with the reseller whether your frame supports hot-swap I/O cards and whether firmware updates unlock additional channels. Request a block diagram showing your specific config's input/output capacity and available expansion slots before finalizing the order.
What are the real-world power demands for the flypack during a 12-hour event, and what supply do I need to provide?+
The unit requires standard 3-phase or single-phase supply per specs, but absolute wattage depends on vision mixer load, multiviewer brightness, audio console DSP, encoding, and fiber converter activity—this can range 2–6 kW. Request a detailed power budget from the reseller for your configuration. Provide a dedicated 20 A single-phase circuit or 30 A 3-phase service (whichever matches your spec). Bring a large uninterruptible power supply (UPS) rated for at least 30 minutes to handle graceful shutdown or switchover. Plan cooling: the flight cases must have ventilation in the OB van; poor airflow will throttle performance.
Can I use this flypack with my existing analog audio console, or does it require an all-digital audio workflow?+
The flypack includes a professional audio mixing console with minimum 8–16 channels per specs, which is the primary audio processor. It can accept analog or digital AES inputs depending on your configuration's I/O card set—confirm installed audio input types in your order. If you need to integrate a legacy analog console, you'll require external analog-to-digital converters (not included) and routing discipline to avoid ground loops. Modern best practice is to use the flypack's console as master; external analog gear should be pre-mixed into a single stereo pair routed to the flypack, not used in parallel. Verify audio I/O specs with your reseller.
What's the typical setup and strike time, and what on-site infrastructure must be ready before the flypack arrives?+
Deployment is 2–4 hours typical, but this assumes power, network, and camera inputs are ready on-site. Pre-event, ensure 3-phase/single-phase power is tested and verified at the truck door, fiber termination points are live, RF links or outside plant circuits are active, and communications headsets are synchronized. Strike (teardown and repacking into flight cases) requires 1.5–2.5 hours with a trained crew. Delays occur if power fails, cable runs are longer than anticipated, or multiviewer calibration is needed. Plan 15 % contingency time. Brief your site manager on power draw, cooling needs, and no-move windows during live output to avoid accidents.
How is the multiviewer configured, and does it integrate with my master control room's confidence monitoring system?+
The flypack includes a multiviewer with multiple reference monitors per specs; typical configurations show program, preview, and camera feeds simultaneously. Integration with external confidence systems depends on whether your multiviewer has SDI, HDMI, or IP outputs available in your build—confirm output ports in the tech spec. The multiviewer runs independently and cannot typically be remote-controlled from a master control facility; it's a local tool for the OB director and vision mixer. If you need to feed multiviewer signals back to your facility, you must assign one SDI output or IP stream to multiviewer and encode it separately—this consumes an output channel. Test multiviewer-to-facility routing during pre-production.
What video formats and frame rates does the flypack support, and are there any constraints mixing 1080i, 1080p, and UHD in a single event?+
The flypack supports standard broadcast formats (SDI generations vary by config—typically HD and 3G/6G SDI), HDMI, and fiber interfaces per specs. Mixing multiple frame rates or standards (1080i, 1080p, UHD) requires the vision mixer to up/downconvert or format-bridge, which introduces latency and may limit effects complexity. Confirm your mixer's real-time conversion capability and whether multicast or quad-link 6G SDI UHD is available in your config. Document all incoming camera formats in pre-production and design a routing matrix before deployment; last-minute format changes cost time on-air. Request a format compatibility matrix from the reseller for your exact switcher model.
Is the equipment under warranty?+
Yes, every used or ex-demo unit is tested and covered by a 90-day warranty. In the event of a failure, the round-trip transport cost is shared equally between the customer and Broadcast Depot.
Do you ship internationally?+
Yes, Broadcast Depot ships worldwide. We arrange transport on quotation, or you can use your own carrier. Delivery usually takes 3 to 5 days. OB vans are delivered by driver or collected on site.
Can I return or exchange a product?+
Yes, in case of an error or if you would like another product from our stock: returns and exchanges are possible with no time limit. Contact us to arrange it.
Technical specifications
| Configuration Type | Modular Portable System |
| Typical Video Inputs | Up to 8-16 SDI/IP channels (varies by configuration) |
| Vision Mixing | Compact broadcast-grade switcher with effects |
| Audio Channels | Minimum 8-16 channels with mixing console |
| Output Formats | SDI, HDMI, Fiber, IP (ASI/Ethernet) |
| Monitoring | Multiviewer with multiple reference monitors |
| Redundancy | Backup switcher and routing systems available |
| Transport | Flight cases - airline transportable |
| Setup Time | 2-4 hours typical deployment |
| Power Requirement | Standard 3-phase or single-phase supply |