Pelican PELI RTS C – Intercom & Commentary Units / Accessories

The PELI RTS C is a dedicated flight case for RTS Systems intercom equipment. It's engineered to protect standard RTS components during transport and storage. Verify your specific RTS units (beltpacks, headsets, power supplies, interface cards) against internal dimensions before purchase. Contact RTS or your integrator to confirm exact component compatibility, as case design targets typical RTS configurations. Custom foam inserts may be required for non-standard setups.

Yes. The flight case is designed for transport and on-location deployment in outside broadcast environments. Its compact form factor suits OB van equipment racks and mobile studios. Ensure your vehicle has secure mounting points or bracing for the case during transit. Plan cable routing from the case to your RTS matrix, intercom amps, and headset distribution. Verify internal case space accommodates your full RTS chain including power supplies and interface modules.

Pelican flight cases provide industry-standard shock and vibration protection via rigid polycarbonate construction and custom foam padding. The PELI RTS C shields RTS equipment from dust, moisture, and mechanical damage during transport. However, it does not provide climate control or active cooling—ensure RTS components operate within specified temperature ranges during storage. For long-term outdoor deployment, add desiccant packs and verify ventilation around the case if powered equipment remains inside.

The flight case provides physical protection only. Power distribution for your RTS matrix, amplifiers, and peripheral devices must be managed separately via external PSUs and conduit. Plan dedicated AC or DC power feeds routed to your RTS intercom rack. Verify your RTS system's total power draw and confirm your mobile unit or studio supply matches those requirements. Document power sequencing to avoid ground loops or voltage spikes.

The case houses RTS components; your intercom matrix and control logic remain in your rack or control room. Plan multicore or CAT5e/CAT6 cable runs from the case to your RTS card cage or DM (digital matrix). Use XLR or RJ45 connectors depending on your RTS generation—verify pinout documentation for your specific modules. Label all cables at source and destination. Secure excess cable with velcro and route away from power lines to minimize hum and crosstalk.

The PELI RTS C is optimized for transport and temporary deployment. For permanent studio or rack-mount installations, integrate RTS components directly into your 19-inch equipment rack instead. The flight case excels in OB, touring, and multi-venue scenarios where portability and protection are critical. If you need both mobility and semi-permanent setups, consider maintaining the case in your transport rotation while using a fixed rack copy for studio work.

Maintain spare RTS beltpacks, headsets, and battery packs alongside the case. Stock spare XLR and network cables, power supplies rated for your RTS matrix, and interface cards for any optional modules. Include a portable headset distribution amp if your RTS system does not provide integrated output. Keep printed RTS system diagrams, firmware versions, and emergency contact information for your RTS provider inside the case or attached documentation pocket. Verify case latch and foam condition before each deployment.

Pelican flight cases are stackable when properly loaded and latched, but RTS equipment inside the PELI RTS C may not tolerate vertical stacking loads. Verify weight limits and component fragility—RTS digital matrices and sensitive electronics risk damage under compression. If stacking is necessary, place the PELI RTS C on top of heavier cases and secure with ratchet straps. For permanent OB van or rack integration, use a dedicated 19-inch sub-rack mount or equipment shelf with vibration isolation rather than stacking.

Inspect latches, hinges, and gaskets quarterly for wear or corrosion, especially in humid or salt-air environments. Clean exterior surfaces with mild soap and water; avoid solvents that degrade polycarbonate. Check foam padding for compression or cracking—degraded foam reduces shock absorption and may leave residue on equipment. Replace foam or gaskets as needed. Store the case in a dry environment with desiccant packs if not in active use. Verify RTS equipment still fits securely inside before each deployment cycle.

Yes. Our used and ex-demo units undergo a full functional inspection — sensors, video outputs, control signals, optics and mechanics — including a colorimetry and sensitivity test. Each product is tested by our technicians and comes with a 90-day warranty. Contact us for the specific warranty terms of the unit you are interested in.