EVS XT3 12 Channels – Replay server

XT3 features 12G-SDI connectivity, supporting modern 12G cables for 4K UHD workflows at full frame rates. This is backward compatible with 6G and 3G-SDI sources at lower resolutions. For fiber-optic conversion, external fiber converters (not built-in) are required—confirm fiber specifications with your systems integrator. All 12 channels can operate independently; plan your cabling architecture during site design to avoid bottlenecks.

Yes. The XT3 supports NMOS (AMWA standard), MOS protocol integration, and native Grass Valley Ignite compatibility. Control via native EVS управљачка табла or third-party RCPs is possible. However, integration depth and control workflow depend on your specific switcher model and firmware version. Coordinate with EVS pre-sales engineering to validate your exact control stack and confirm MOS gateway configuration before deployment.

The XT3 handles 4K UHD, HD, and SD formats (1080i/p, 720p, 576i/p, 480i/p) at frame rates from 23.98fps to 60fps, including 50fps and 59.94fps standards. Mixing different formats and frame rates across the 12 channels in one session is supported. Storage consumption scales with resolution and frame rate; plan your SSD capacity accordingly, especially for multi-hour live events requiring 4K at 59.94fps on multiple channels simultaneously.

The XT3 includes dual redundant power supplies, eliminating single-point-of-failure risk for AC mains loss. Storage redundancy is achieved via RAID configurations on high-capacity SSDs—the exact RAID level and hot-swap capability depend on your configuration. For mission-critical events, specify RAID 6 or backup external storage systems during order. Test failover procedures in advance; redundancy is only effective if monitored and regularly validated.

The XT3 delivers full frame-rate playback up to 10x успорени снимак on all recorded channels. Успорени снимак playback operates within the unit's native processing architecture—no external rendering required. Storage and I/O bandwidth are already provisioned for simultaneous record and playback at full spec. Performance remains consistent across HD and 4K; no performance degradation occurs when accessing multiple успорени снимак channels concurrently.

The XT3 is a 19-inch rack mount, 7U form factor—standard for broadcast racks. Confirm your Prenosna kola has 7U contiguous space with proper ventilation. Dual redundant power supplies support typical 200–240V three-phase broadcast standards; confirm exact power draw and cooling capacity with EVS specifications for your region. Plan for adequate UPS backup, network patching (10 Gigabit Ethernet for high-bitrate recording), and audio monitoring via Dante. Test thermal performance in your enclosure.

The XT3 includes 10 Gigabit Ethernet ports for high-speed file transfer and remote access. Minimum infrastructure: dedicated 10GbE switch, properly terminated cabling (Cat6A or fiber), and network isolation from broadcast data streams to prevent interference. Cloud connectivity for backup depends on available bandwidth and your cloud partner; most OB operations use local SSD redundancy plus scheduled cloud archival. Consult your IT team on network topology and bandwidth budgeting before deployment.

Yes. Frame-accurate control and NMOS compatibility enable seamless integration with graphics engines and edit controllers. The XT3's simultaneous 12-channel capture and playback support multi-angle instant replay workflows common in sports production. Integration specifics—including graphics triggering, metadata pass-through, and control sequencing—depend on your graphics and production control system. Work with systems integrators to map your exact replay workflow before go-live.

The XT3 runs a dedicated Linux-based broadcast operating system, reducing third-party software conflicts. SSD module replacement and firmware updates are field-serviceable; confirm exact procedures and spare-parts availability with EVS support. RAID-configured drives support hot-swap without stopping recording/playback. Schedule routine maintenance windows for firmware updates and drive health checks. Establish a spare-parts contract and support plan tailored to your event schedule and risk tolerance.

Да. Наше коришћене и демо јединице подлежу комплетној функционалној инспекцији — сензори, видео излази, контролни сигнали, оптика и механика — укључујући тест колориметрије и осетљивости. Свака јединица је тестирана од стране наших техничара и долази са 90-дневном гарантијом. Контактирајте нас да бисте сазнали специфичне услове гарантије за јединицу која вас интересује.