CVW PRO800 – Wireless Systems for Cameras

The CVW PRO800 is an HD-SDI transmitter, supporting standard HD video over SDI. Confirmed specifications indicate HD capability; however, detailed frame rate support (59.94p, 50p, 23.976p) and whether 1080i/720p variants are both supported requires verification with CVW technical documentation. Request format compatibility matrix from your distributor to confirm alignment with your facility's standard workflows and upstream equipment outputs.

The CVW PRO800 transmits HD-SDI video; control protocol compatibility (CCU remote control, camera positioning, iris/focus commands) depends on whether your existing RCP and CCU use standard broadcast control buses (RS-422, Ethernet, or proprietary protocols). Verify the PRO800's control input/output specifications and whether it passes or terminates control signals. This is critical for seamless integration in your production chain.

The CVW PRO800 is rated for 800m range operation. This distance assumes optimal line-of-sight conditions and standard atmospheric clarity. Range degrades with rain, fog, dust, and RF interference. Confirm whether this spec accounts for your operating environment (coastal salt spray, urban RF congestion, altitude). Test in representative conditions before critical deployment; plan relay stations or backup links for mission-critical applications beyond 600m.

Confirmed specifications do not detail voltage, wattage, or connector type. Before procurement, obtain CVW power specifications (12/24VDC or AC input, watts, connector). OB van integration requires matching your power distribution architecture—document whether battery-backed PSU, generator feed, or mains outlet is required, and confirm DC-UPS compatibility if the unit supports it. This directly impacts van wiring and emergency power planning.

The specification indicates quantity 1 unit. Redundancy strategy depends on whether multiple PRO800 units can feed a single SDI path (multicast/switching) or if external video routers/switchers handle automatic failover. For critical OB operations, clarify: Does CVW provide failover architecture guidance? Can two units operate in standby mode? Design your system assuming single-unit operation unless CVW documents explicit redundancy support.

The CVW PRO800 transmits HD-SDI; standard SDI coaxial cable (75Ω BNC) applies for connections to your router, mixer, or recorder. HD-SDI sustains quality to approximately 300m over quality cable; the PRO800's 800m range is wireless transmission only. For hardwired backup or studio tie-ins, budget SDI cable runs and distribution amplifiers accordingly. Confirm whether your remote site has SDI reception equipment rated for this transmitter's output.

Verified specifications do not detail MTBF, field-replaceable modules, or environmental rating (IP code). Before deploying to remote or harsh locations (rain, extreme heat, dust), request CVW environmental specs and approved maintenance intervals. Confirm availability of spare batteries, firmware update procedures, and whether repair requires factory return or field-swappable components exist. Include spare inventory in your OB kit planning.

The PRO800 outputs HD-SDI; integration depends on your router's available input cards and whether they match the transmitter's SDI generation (HD-SDI compatibility is assumed). Verify that your monitoring systems, multiviewers, and recording devices have matching HD-SDI BNC inputs. If your facility uses IP-based workflows or ST 2110, confirm whether external SDI-to-IP converters are required, adding latency and complexity to your signal chain.

Confirmed specification indicates the unit itself; accessory inclusion is not documented. Before budgeting, request a complete bill of materials from CVW: transmit/receive antennas, mounting brackets, power cable, SDI connectors, and RF connectors. Verify whether professional-grade directional antennas are included or if you must source separately for 800m range performance. Incomplete accessory lists lead to deployment delays—obtain the full kit specification in writing.

Yes. Our used and ex-demo units undergo a full functional inspection — sensors, video outputs, control signals, optics and mechanics — including a colorimetry and sensitivity test. Each product is tested by our technicians and comes with a 90-day warranty. Contact us for the specific warranty terms of the unit you are interested in.